Wright Tool 9R31020 2" Heavy Duty Pipe Wrench (14" Length)


  • Media
$51.96 each

Description:

heavy duty pipe wrench, 14-Inch. They feature the patented Wright Drive and Wright Grip, which provides more torque with less fastener damage, distributing stress evenly over a larger contact area and away from the fastener corners.


Part Number: 970699967
Mfg Part Number: 73-014,9R31020
Brand: WRIGHT TOOL COMPANY

  • ?Wright wrenches feel as good as they look
  • Have a reserve of strength for tough jobs
  • Provides more torque with less fastener damage
Safety:
  • Users and bystanders must wear safety goggles
  • To avoid possible eye injury from flying objects, safety goggles or equivalent protection conforming to ANSI Z87.1 shall be worn and kept clean by the user and all persons in the immediate area where any tool is being used
  • Comfort or plastic grips on handles are not intended to give any degree of protection against electric shock and shall not be used on or near live electric circuits
  • Wrenches are to be used by hand only. Do not use cheater bars or any other means of increasing leverage. The only wrenches that can be struck with a hammer are striking wrenches
  • Never use wrenches for prying or as a hammer
  • Never expose any wrench to excessive heat, which may change the hardness or microstructure and ruin the tool
  • Wrenches are to be used to turn (tighten and loosen) fasteners
  • Users shall apply a controlled force with a stance adjusted and braced to prevent rapid bodily movement or a fall if sudden release occurs
  • Use the correct size wrench, do not use metric wrenches on inch fasteners or inch wrenches on metric fasteners, because the fit is not good enough
  • Always be sure to fully seat an open-end wrench on the nut or bolt
  • Adjustable wrenches need to be tightly adjusted to fit the nut with the force applied to the fixed jaw. Never use adjustable wrenches for the initial breaking loose of a “frozen” fastener or for final tightening
  • Pipe wrenches are designed to turn or hold pipe; never use a pipe wrench to bend, raise or lift a pipe. Do not use pipe wrenches on square stock
  • Inspect each pipe wrench or adjustable wrench before use for worn or broken teeth, thumbscrews or jaws and discard if deteriorated
  • Inspect and discard bent, worn or cracked wrenches
  • Wrench opening configurations shall be inspected before each use and their use discontinued at the first sign of significant wrenching surface deterioration
  • Wrenches shall not be used when jaws are sprung to the point slippage may occur
  • Length - 14"
  • Max. Pipe Diameter - 2"

Need Help? Please contact us at 1-877-GO ALTEC, Option 1.

Copyright © 2018 Altec Industries. All Rights Reserved. "Altec" is a registered trademark of Altec Industries, Inc.

Altec Inc.

210 Inverness Center Drive
Birmingham, AL 35242-4834
Phone (205) 991-7733
Fax (205) 408-8601

We use cookies on our site to provide you with the best user experience. This data may be used for personalization, analytics, and ads. Disabling cookies may also prevent parts of website from working properly.