Stanley Hydraulic Tools SM50100 Sump Pump, 7-12 gpm/26-45 lpm, with Flush Face Quick Disconnect Couplers, 500 gpm Output


  • Media
$2,273.26 each

Description:

SM50100 -,7-12 gpm/26-45 lpm, with flush face quick


Part Number: 970045814
Mfg Part Number: SM50100
Brand: Stanley Hydraulic Tools

The SM50 Water Pump is a submersible, centrifugal type pump that requires no priming. The motor is contaminant-tolerant gear motor uniquely designed for continuous highspeed operation. The motor drives the impeller directly, so there are no spindle bearings that require periodic lubrication or replacement. The cast stainless steel, semi-closed impeller resists corrosion. A series of seals on the drive shaft effectively keep hydraulic fluid and pumped water where they belong while allowing the pump to be run dry without sudden seal failure. The SM50 is fitted with dripless flatfaced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system. The water outlet is 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting. Access to the pumping chamber for cleaning requires the removal of only two capscrews. The motor with the impeller attached is then easily removed from the pump casing. The SM50 can draw down water to a depth of 3.5 inches. Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump. The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump. The pump will handle clear water and water containing up to 10% solids.
  • Capacity 5 gpm/189 lpm
  • Weight21 lbs/9.5 kg
  • Length 1.5 in./26.7 cm
  • Width 1 in./25.4 cm
  • Pressure1-2 psi/7–14 bar
  • Flow Range7–12 gpm/26-45 lpm
  • Maximum Flow. 12 gpm/45 lpm
  • Porting.–8SAE O-ring
  • Connect Size and Type3/8 in. Flush Face Quick Disconnect Couplers
  • Discharge Diameter 3 in./7.6 cm
  • Sound Pressure<85 dBA @ 1 m

Need Help? Please contact us at 1-877-GO ALTEC, Option 1.

Copyright © 2019 Altec Industries. All Rights Reserved. "Altec" is a registered trademark of Altec Industries, Inc.

Altec Inc.

210 Inverness Center Drive
Birmingham, AL 35242-4834
Phone (205) 991-7733
Fax (205) 408-8601

We use cookies on our site to provide you with the best user experience. This data may be used for personalization, analytics, and ads. Disabling cookies may also prevent parts of website from working properly.