Wright Tool 402 11-Piece 1/2" Drive 12 Point Deep Socket Set, 1/2" - 1-1/8"


  • Media
$161.72 each

Description:

Own the best in sockets sets with the Wright Tool 11 piece 12 point deep socket set. Sockets come in 1/2-Inch, 9/16-Inch, 5/8-Inch, 11/16-Inch, 3/4-Inch, 13/16-Inch, 7/8-Inch, 15/16-Inch, 1-Inch, 1-1/16-Inch, and 1-1/8-Inch.


Part Number: 970276710
Mfg Part Number: 402
Brand: WRIGHT TOOL COMPANY

  • The Wright Drive was created and patented by the Wright Tool Company, taking full advantage of advanced CAD/CAM technologies. It actually improves the torque load capabilities of every fastener, whether it’s a soft stove bolt or a hardened aerospace fastener
  • Torque loads are moved away from fastener corners to prevent rounding
  • Stress is distributed over a much larger area of the fastener
  • Leverage is improved, eliminating fastener rounding and increasing tool strength
  • Tool-to-fastener contact area is ten times greater than with a conventional design, and almost twice that of a First Generation AS954 tool
  • Maximum .057" length of flat contact at engagement under load with 5/8" Wright Drive design and SAE Grade 5 fastener

?Includes:

  • 4616 - 1/2" 12 Pt. Deep Socket
  • 4618 - 9/16" 12 Pt. Deep Socket 
  • 4620 - 5/8" 12 Pt. Deep Socket
  • 4622 - 11/16" 12 Pt. Deep Socket
  • 4624 - 3/4" 12 Pt. Deep Socket
  • 4626 - 13/16" 12 Pt. Deep Socket
  • 4628 - 7/8" 12 Pt. Deep Socket
  • 4630 - 15/16" 12 Pt. Deep Socket
  • 4632 - 1" 12 Pt. Deep Socket
  • 4634 - 1-1/16" 12 Pt. Deep Socket
  • 4636 - 1-1/8" 12 Pt. Deep Socket
  • W013 - Rail
  • W4 - 11 Clips

Safety:

  • Users and bystanders must wear safety goggles
  • To avoid possible eye injury from flying objects, safety goggles or equivalent protection conforming to ANSI Z87.1 shall be worn and kept clean by the user and all persons in the immediate area where any tool is being used
  • Comfort or plastic grips on handles are not intended to give any degree of protection against electric shock and shall not be used on or near live electric circuits
  • Never use hand sockets or hand attachments on power drivers, impact drivers or hydraulic drivers. Black industrial sockets, Torx® sockets and Torx® bit sockets are designed and finished to be hand sockets – not impact
  • Never use cheater bars to increase handle leverage
  • Never hammer on a ratchet or handle
  • Never use ratchets or other handles as a hammer or pry bar
  • Hand sockets are to be attached to ratchets and handles and used by hand to turn fasteners
  • Users shall apply a controlled force with a stance adjusted and braced to prevent rapid bodily movement or a fall if sudden release occurs
  • Use the correct size socket, do not use metric sockets on inch fasteners or inch sockets on metric fasteners, because the fit is not good enough. Do not use hex sockets on square fasteners or square sockets on hex fasteners
  • Place the socket all the way on the fastener
  • Adaptor strength is limited to the smallest drive square member
  • Never use sockets as a driver for hex or square bits or shafts
  • Inspect and discard bent, worn or cracked sockets, handles or attachments
  • Socket opening configurations shall be inspected before each use and their use discontinued at the first sign of significant wrenching surface deterioration
  • Drive Size - 1/2"
  • Number of Pieces - 11
We use cookies on our site to provide you with the best user experience. This data may be used for personalization, analytics, and ads. Disabling cookies may also prevent parts of website from working properly.