Hubbell Epoxiglas Wireholding Stick 1.25"X6'5" 6.5LBS


  • PHOTO
$371.01 each

Description:

The Chance Epoxiglas® Wire-Holding Stick is used on or around energized lines for forming, bending and positioning jumper wires; and for holding conductors during splicing operations.


Part Number: 900030368
Mfg Part Number: C4033068
Brand: HUBBELL POWER SYSTEMS

  • The Chance Epoxiglas® Wire-Holding Stick is used on or around energized lines for forming, bending and positioning jumper wires; and for holding conductors during splicing operations.
  • The gripper, equipped with an eye so that other sticks can assist with heavy bending, will handle No. 6 solid copper through 1590 kcmil ACSR.
  • Operation of the Wire-Holding Stick has been simplified so that it grips much like locking-type pliers.
  • By tightening the knurled nut at the control lever, the wireholding jaws can be positioned to firmly grip the conductor.
  • The tightening control lever must be relaxed in a position about 1 inch away from the pole.
  • To secure the grip on the conductor, push lever down to pole; and to release the conductor simply move the control lever all the way up along the rod.
  • The head of the tool locks in three stop positions so that the lineman can engage and position conductors easily from most angles.
  • The knurled screw handle below the jaw opening is used to adjust the head position from straight to right or left.
We use cookies on our site to provide you with the best user experience. This data may be used for personalization, analytics, and ads. Disabling cookies may also prevent parts of website from working properly.